You are here: Home > ACCESSORIES
Choose a sub category:
Skid Plate Gaskets Shift Knobs / Shifters
License Plate Bracket SEAT RAILS Hardtop Brackets (S2000)
Oil Catch / Breather Tanks Exhaust Shield Spark Plug Covers
Steering Wheel Adapters Strut / Reinforcement Bars
Sort By:
Page of 1
Private Label MFG Mild Steel o2 Bung Private Label MFG Mild Steel o2 Bung

Private Label MFG Mild Steel o2 Bung

List Price: $10.00
Our Price: $10.00
Sale Price: $8.00
You save $2.00!
Private Label MFG 3 Bolt Gasket Private Label MFG 3 Bolt Gasket

Private Label MFG 3 Bolt Gasket

List Price: $10.00
Our Price: $10.00
Sale Price: $8.00
You save $2.00!
Private Label MFG Stainless Steel o2 Bung Private Label MFG Stainless Steel o2 Bung

Private Label MFG Stainless Steel o2 Bung

List Price: $15.00
Our Price: $15.00
Sale Price: $12.00
You save $3.00!
Ultra Copper Maximum Temperature RTV Silicone Gasket Maker, 3 oz. Tube ULTRA COPPER GASKET MAKER

If you have a exhaust leak at the slip-joint section or at the gasket area, this product will solve your problem!

  • Most advanced, high temp RTV silicone gasket available
  • Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets
  • Sensor-safe, low odor, and non-corrosive with superior adhesion
  • Temperature range -75F to 700F intermittent
  • Suggested Applications: Exhaust manifolds / headers, valve covers, oil pans, timing covers, water pumps, thermostat housings
  • List Price: $20.00
    Our Price: $14.95
    Sale Price: $14.95
    You save $5.05!
    Private Label MFG Honda B Series Gasket Private Label MFG Honda B Series Gasket

    Private Label MFG Honda B Series Gasket

    List Price: $20.00
    Our Price: $20.00
    Sale Price: $15.00
    You save $5.00!
    Private Label MFG Honda K-Swap Gasket Private Label MFG Honda K-Swap Gasket

    Private Label MFG Honda K-Swap Gasket

    List Price: $20.00
    Our Price: $20.00
    Sale Price: $15.00
    You save $5.00!
    Private Label MFG Honda H Series Gasket Private Label MFG Honda H Series Gasket

    Private Label MFG Honda H Series Gasket

    List Price: $20.00
    Our Price: $20.00
    Sale Price: $15.00
    You save $5.00!
    EXHAUST SPRING (SET OF 2) EXHAUST SPRING (SET OF 2)

    Beehive Collector Spring

    List Price: $19.95
    Our Price: $19.95
    Sale Price: $15.00
    You save $4.95!
    Private Label MFG Stainless Steel o2 CEL (CHECK ENGINE LIGHT) FIX/FOULER Private Label MFG Stainless Steel o2 CEL (CHECK ENGINE LIGHT) FIX/FOULER

    • Prevents CEL (Check Engine Light) / MIL (Malfunction Indicator
      Lamp) from illuminating when removing the stock catalytic converter
    • Bolt-on, no cutting or modification of stock wiring like an electronic CEL Fix / MIL Eliminator
    • Adjustable design allows sensor to be mounted in any direction to maximize exhaust clearance
    • Right angle allows more clearance compared to straight CEL fixes
    • CNC cut
    • Easy bolt-on installation with typical hand tools, no welding or cutting required.
    • For off-road race / track use only
    • NOT to be installed with primary oxygen sensor (sensor before the catalytic converter)
    • Male end threads into existing M18 X 1.5 O2 bungs
    • O2 sensor threads into female end
    • LENGTH = 1.8 inches

    List Price: $30.00
    Our Price: $30.00
    Sale Price: $15.00
    You save $15.00!
    Private Label MFG Stainless Steel ANGLED (90 DEGREES) O2 CEL (CHECK ENGINE LIGHT) FIX/FOULER Private Label MFG Stainless Steel ANGLED (90 DEGREES) O2 CEL (CHECK ENGINE LIGHT) FIX/FOULER

    Private Label MFG Stainless Steel ANGLED (90 DEGREES) O2 CEL (CHECK ENGINE LIGHT) FIX/FOULER
    Installs in the secondary oxygen sensor hole downstream of the catalytic converter

    List Price: $30.00
    Our Price: $30.00
    Sale Price: $15.00
    You save $15.00!
    Private Label MFG Donut Gasket Private Label MFG Donut Gasket

    Private Label MFG Donut Gasket

    List Price: $40.00
    Our Price: $40.00
    Sale Price: $20.00
    You save $20.00!
    PLM BALL TYPE SHIFT KNOB PLM BALL TYPE SHIFT KNOB

    The PLM ball type shift knob is one of the popular shift knobs on the market. Made of the same material of the OEM Honda aluminum, it combines both improved feel, shortened height and response.

    M10x1.5 - HONDA ONLY

    WEIGHS 5ozs

    List Price: $20.00
    Our Price: $20.00
    Sale Price: $20.00
    PLM JDM Zealous Wako Zealous License Plate PLM JDM Zealous Wako Zealous License Plate

    Zealous License Plate Tilt System by Wako

    The Zealous License Plate Tilt System by Wako Japan is an awesome and much better alternative to the "fixed type" tilt brackets produced by others. Since the Zealous License Plate Tilt System is a two piece unit, it can be applied to just about any license plate configuration.
    Fully adjustable angles - angle them however you want... angled down, angled up, horizontal, etc.

    Stop getting pulled over for no front plate, and sport your front plate with this cool license plate bracket!!

    NOTE: Some vehicles may require drilling new holes into either your license plate, or the bracket, due to Japanese plates having different hole patterns.

    List Price: $30.00
    Our Price: $30.00
    Sale Price: $20.00
    You save $10.00!
    Mercedes Front License Plate Bracket W164 ML350 ML500 Mercedes Front License Plate Bracket W164 ML350 ML500

    Mercedes Front License Plate Bracket

    Fits: all years (06 - 09) of ML350 and ML500 with W164 body only.

    Don't pay over $80 at the dealer for a simple front license plate bracket !  I feel your pain, ML-Class owners, paying $80 at the dealer for a simple piece of plastic.

    I made this this part affordable.

    This is a 100% OEM-Spec reproduction part.  The quality of the part meets OEM quality.

    Most states require a front license plate now. This is the license plate bracket you need to mount the front plate onto your front bumper.

    You can not simply attach a front license plate unless you have this bracket.

    Part # A164-885-0381 or Part # A164-885-0081 are the OEM part numbers.

    These all come in black satin plastic from the factory so you do not have to worry about color matching to your car.

    List Price: $40.00
    Our Price: $40.00
    Sale Price: $20.00
    You save $20.00!
    Private Label MFG SPHERICAL SHIFT KNOB (290 GRAMS) Private Label MFG SPHERICAL SHIFT KNOB (290 GRAMS)

    Private Label MFG SPHERICAL SHIFT KNOB (290 GRAMS) is one of the popular shift knobs on the market. Made of the same material of the OEM Honda aluminum, it combines both improved feel, shortened height and response. Each shift knob weighs in at 290 GRAMS.  Available in unique POLISHED MIRROR FINISH or Polished NEO BURNT!

    DIMENSIONS
    1.85 inches  HEIGHT
    1.85 inches  DIAMETER

    Available in
    M10x1.5 - (HONDA)
    M10x1.25mm - (Nisssan/Infiniti/Mitsubishi/Mazda)
    M12x1.25mm - (Toyota/Lexus/Subaru)

    WEIGHS 290 GRAMS

    List Price: $50.00
    Our Price: $50.00
    Sale Price: $20.00
    You save $30.00!
    Private Label MFG Stainless Steel ADJUSTABLE O2 CEL (CHECK ENGINE LIGHT) FIX/FOULER Private Label MFG Stainless Steel ADJUSTABLE O2 CEL (CHECK ENGINE LIGHT) FIX/FOULER

    Private Label MFG Stainless Steel ADJUSTABLE O2 CEL (CHECK ENGINE LIGHT) FIX/FOULER
    Installs in the secondary oxygen sensor hole downstream of the catalytic converter

    List Price: $40.00
    Our Price: $40.00
    Sale Price: $20.00
    You save $20.00!
    Private Label MFG Female to Female Donut Converter Private Label MFG Female to Female Donut Converter

    Private Label MFG Female to Female Donut Converter

    List Price: $40.00
    Our Price: $40.00
    Sale Price: $20.00
    You save $20.00!
    Private Label MFG Stainless Steel J-STYLE ANGLED ADJUSTABLE O2 CEL (CHECK ENGINE LIGHT) FIX/FOULER Private Label MFG Stainless Steel J-STYLE ANGLED ADJUSTABLE O2 CEL (CHECK ENGINE LIGHT) FIX/FOULER

    Private Label MFG Stainless Steel J-STYLE ANGLED ADJUSTABLE O2 CEL (CHECK ENGINE LIGHT) FIX/FOULER
    Installs in the secondary oxygen sensor hole downstream of the catalytic converter
    Comes with three changeable flow fittings

    List Price: $35.00
    Our Price: $35.00
    Sale Price: $26.00
    You save $9.00!
    Private Label MFG Universal Header / Manifold Skid plate Private Label MFG Universal Header / Manifold Skid plate

    Universal header skid plate shield come with 3 large steel clamp. protect your highend aftermarket header / Manifold from speed bumps and road debris. Our header shield is made from 1.5mm high strength steel size is 7.5 inch length and 3.8 inch width Each order will include 1 header shield and 3 large clamp.

    Please measure before ordering. If your header or exhaust is wider you can purchase longer clamps, or multiple skid plates

    List Price: $49.99
    Our Price: $49.99
    Sale Price: $29.00
    You save $20.99!
    Private Label MFG TEARDROP SHIFT KNOB (150 GRAMS) Private Label MFG TEARDROP SHIFT KNOB (150 GRAMS)

    Private Label MFG TEARDROP  SHIFT KNOB (150 GRAMS) is one of the popular shift knobs on the market. Made of the same material of the OEM Honda aluminum, it combines both improved feel, shortened height and response. Each shift knob weighs in at 150 GRAMS.  Available in unique POLISHED MIRROR FINISH or Polished NEO BURNT!

    DIMENSIONS
    3.15 inches  HEIGHT
    1.70 inches  DIAMETER

    Available in
    M10x1.5 - (HONDA)
    M10x1.25mm - (Nisssan/Infiniti/Mitsubishi/Mazda)
    M12x1.25mm - (Toyota/Lexus/Subaru)

    WEIGHS 150 GRAMS

    List Price: $85.00
    Our Price: $85.00
    Sale Price: $35.00
    You save $50.00!
    Private Label Mfg LICENSE PLATE BRACKET Private Label Mfg LICENSE PLATE BRACKET

    Applications:
    2015+ Subaru WRX/STI
    2013+ FRS/BRZ
    In most states they require a front license plate and placing it in the windshield is not acceptable and zip ties does not look good. The license plate kit allows you to mount your license plate on the tow hook location. This location also allows more air access to the radiator and other engine parts for better performance.
    Kit features a dual position mount where it can be contoured to the front bumper or it can face straight forward.
    Plate is coated in a matte black finish and tow hook adapter is black anodized.
    Kit includes everything pictured above.

    List Price: $49.99
    Our Price: $49.99
    Sale Price: $35.00
    You save $14.99!
    Private Label MFG 3” >2.5” Exhaust Adapter Flange Private Label MFG 3 >2.5 Exhaust Adapter Flange

    The Private Label MFG Exhaust Adapter Flange 3 >2.5 is made for the Subarus with 3" DOWNPIPES - 2.5" OEM Midpipes. This was designed to eliminate exhaust leaks typical with other designs. It consists of a Flared 3.0 flange which is inserted in the downpipe that smoothly transitions to a 2.5 pipe which is inserted into your OEM/2.5 Midpipe.

    For use with 3" DOWNPIPES - 2.5" OEM

    Might work on other applications

    Our Price: $59.00
    Sale Price: $39.00
    You save $20.00!
    Private Label MFG  2.5” > 3.0" Exhaust Adapter Flange Private Label MFG 2.5 > 3.0" Exhaust Adapter Flange

    The Private Label MFG 2.5 > 3.0" Exhaust Adapter Flange is made for the Subarus with 2.5 / OEM DOWNPIPES - 3.0" Midpipes / Catbacks. This was designed to eliminate exhaust leaks typical with other designs. It consists of a 2.5 Machined Lip flange which is inserted in the downpipe that smoothly transitions to a 3.0" diameter which is connected into your 3.0 Midpipe/ Catback

    For use with 2.5 / OEM DOWNPIPES - 3.0" Midpipes / Catbacks

    Might work on other applications

    List Price: $59.00
    Our Price: $59.00
    Sale Price: $39.00
    You save $20.00!
    PLM Exhaust Shield PLM Exhaust Shield

    Private Label MFG exhaust exit shield trim (UNIVERSAL FOR HOOD FENDER BUMPER) STAR SHAPE

    Private Label MFG exhaust exit shield trim is made of .030 inch thick Stainless steel. The inner diameter is 3x3.75inch, but can be modified to be bigger. The exhaust exit trim can be used on the bumper, fender, and hood. This will protect these parts, from heat, exhaust fumes, and fire while being aesthetically pleasing. This piece will have to be riveted on to your vehicle.

    List Price: $60.00
    Our Price: $60.00
    Sale Price: $50.00
    You save $10.00!
    Private Label Mfg S2000 HARD TOP SECURITY BRACKETS Private Label Mfg S2000 HARD TOP SECURITY BRACKETS

    Private Label Mfg s2000 HARD TOP SECURITY BRACKETS are the most cost efficient theft deterrent for your car or for the track. They are made out of 100 percent aluminum for weight reduction. The hardtop brackets will replace the OEM strikers plates and latches allowing for secure and solid mounting of your OEM or certain aftermarket tops without the cost of the OEM Honda latches and striker plates while using the OEM bolt locations for easy installation

    *NOTE* INSTALLED PICTURES ARE WITH CUSTOM SECURITY BOLTS

    List Price: $199.00
    Our Price: $199.00
    Sale Price: $89.00
    You save $110.00!
    Private Label Mfg Spark Plug Cover Private Label Mfg Spark Plug Cover

    The Private Label Mfg SPARKPLUG / COILPACK COVERS Are made from billet aluminum and made to fit the certain model's engine.

       Custom fit for your  engine
       Brushed aluminum finish
       Every cover comes with stainless steel mounting hardware
       Made from weapons grade aluminum
       Anodized for a permanent high end color solution.
       Dimple die cut-outs
       Super easy to install.

    Honda Acura B-Series VTEC Engines only.  Will not fit B series NON VTEC Engines

    List Price: $150.00
    Our Price: $150.00
    Sale Price: $125.00
    You save $25.00!
    Private Label MFG POWER DRIVEN FULLY ADJUSTABLE SHIFTER (B/D) Private Label MFG POWER DRIVEN FULLY ADJUSTABLE SHIFTER (B/D)

    The Private Label Mfg Fully Adjustable shifter is constructed with high quality alloy steel for maximum durability and reliability to ensure the shifter will last. The added weight of the shifter results in smoother and more positive shifting with the ergonomic design that just falls into your hands, to the very first ultra-smooth shift.  The shifter was designed to have an adjustable ratio as the stock shifter to an more aggressive feel. The shifter is fully height adjustable to accommodate each drivers desired position, as every driver is different. The shifter certainly does not look stock, but the shift feel and throw can be adjusted like the stock shifter. Each short shifter features a non-binding sealed bearing and a low friction coating that ensures smooth and precise shifting, even under the harshest driving conditions.

    List Price: $180.00
    Our Price: $180.00
    Sale Price: $145.00
    You save $35.00!
    Private Label MFG 3 POINT FRONT STRUT BAR EK9/DC2/EG6/ Private Label MFG 3 POINT FRONT STRUT BAR EK9/DC2/EG6/

    Private Label MFG 3 POINT front strut bars for the Honda Civic (92-00) and Acura Integra (94-01) are designed to strengthen the chassis of the Civic's and Integra's by joining the two shock towers together along with a third chassis reinforcement. Improve the road feel and handling characteristics of your Civic/Integra during spirited street or track performance driving.

    Private Label MFG 3 POINT front strut bars and Braces are handcrafted and developed right here in the states from T6061 aircraft grade aluminum. We're proud to deliver the strongest and best looking aluminum bars in the market, exceeding the competition in both form and function. FACT: One of the biggest problems with most unibody construction cars that stay BONE STOCK from the factory is shock tower flex, a condition in which the shock/strut towers will flex under hard cornering, results in sloppy, unpredictable suspension feel.

    Say 'NO!' to Shock Tower Flex with the strongest, best looking Strut Bars and Braces on the market - form, function and longevity!

    More Information about Private Label MFG 3 POINT front strut bars:
    -Laser-cut mounting flanges. Cut and formed from a single piece of T6061 Aluminum.
    -Individually TIG welded for added strength, performance, rigidity, and quality control.
    -Constructed from the thickest wall thickness on the market (0.125").

    Expect dramatic improvements to high speed cornering on and off the tracks right after installation with a quality Private Label MFG 3 POINT front strut bars that will last the lifetime of your vehicle. And the kicker? Our bars were designed to 'world-spec, and will fit both LHD and RHD applications! Happy Motoring!


    Available for:

    EK9
    EG6
    DC2

    List Price: $250.00
    Our Price: $250.00
    Sale Price: $195.00
    You save $55.00!
    Private Label MFG  Crossbar (x-bar)   EK9/DC2/EG6/S13 Private Label MFG Crossbar (x-bar) EK9/DC2/EG6/S13

    Private Label MFG Crossbars utilizes the c-pillar and strut points to decrease body flex during hard cornering, while having a stylish look to your vehicle where no has had at an affordable price.  We have maximized four critical points of the chasis to one stress point, while retaining  the vehicles rear seats with minor adjustments to the brackets. The improvement is undeniable, you will feel the difference instantly when installed for maximum rigidity.

    List Price: $500.00
    Our Price: $500.00
    Sale Price: $300.00
    You save $200.00!
    Private Label MFG POWER DRIVEN FULLY ADJUSTABLE SHIFTER (K-SWAP) Private Label MFG POWER DRIVEN FULLY ADJUSTABLE SHIFTER (K-SWAP)

    The Private Label Mfg Kswap Fully Adjustable shifter is constructed with high quality alloy steel and BILLET ALUMINUM for maximum durability and reliability to ensure the shifter will last. The added weight of the shifter results in smoother and more positive shifting with the ergonomic design that just falls into your hands, to the very first ultra-smooth shift.  The shifter was designed to have an adjustable ratio as the stock shifter to an more aggressive feel. The shifter is fully height adjustable to accommodate each drivers desired position, as every driver is different. The shifter certainly does not look stock, but the shift feel and throw can be adjusted like the stock shifter. The Shifter was designed so you would not need to cut the exhaust tunnel in the following applications

    , EG, EK, DA and DC2(88-00 Civics and 90-01 Integra) chassises with K-swapped motors.

    List Price: $400.00
    Our Price: $400.00
    Sale Price: $320.00
    You save $80.00!