You are here: Home > ENGINE
Choose a sub category:
Heat Exchangers Intake MAP Sensors
H2B Swap Kit Throttle Bodies EGR Coolers / Deletes
Charge Pipes Intercooler
Sort By:
Page of 1
Private Label MFG Power Driven 4 BAR MAP SENSOR  B/D/H/F-Series Private Label MFG Power Driven 4 BAR MAP SENSOR B/D/H/F-Series

Applications: 88-00 Civic/CRX, 90-01 Integra, 93-97 Del-Sol, 92-01 Prelude, 00-05 S2000, 97-01 CRV, 94-02 Accord

Note: Requires engine management to use (Flashpro/K-Pro/S300/AEM)

Private Label MFG Power Driven 4 BAR MAP SENSORS B/D/H/F-Series are designed to accurately read the increased manifold pressures on turbo or supercharger setups and will reliably support up to 43 psi of boost pressure. The sensors feature direct plug and play fitment for several Honda / Acura applications and are easy to install. The sensor provides the fastest response time available of 0.001 seconds and an accuracy over 99%. We offer a 1 year warranty with all MAP Sensors.

BAR is a unit of measure, 1 BAR = 14.5psi. When calibrating in your ECU 4 Bar will be a standard that can be easily selected or calibrated. You will simply select the appropriate sensor from the MAP tab of your preferred tuning software and your all set. Select your application carefully as there a 3 different style sensors currently available.

Scalar 838

Offset 31

List Price: $79.99
Our Price: $79.99
Sale Price: $39.99
You save $40.00!
Private Label MFG Power Driven 4 BAR MAP SENSOR K-series (Except K24Z-Series) Private Label MFG Power Driven 4 BAR MAP SENSOR K-series (Except K24Z-Series)

Applications: All K-Series engines (Except K24Z-Series).

Note: Requires engine management to use (Flashpro/K-Pro/S300/AEM)

Private Label MFG Power Driven 4 BAR MAP SENSORS K-series (Except K24Z-Series)are designed to accurately read the increased manifold pressures on turbo or supercharger setups and will reliably support up to 43 psi of boost pressure. The sensors feature direct plug and play fitment for several Honda / Acura applications and are easy to install. The sensor provides the fastest response time available of 0.001 seconds and an accuracy over 99%. We offer a 1 year warranty with all MAP Sensors.

BAR is a unit of measure, 1 BAR = 14.5psi. When calibrating in your ECU 4 Bar will be a standard that can be easily selected or calibrated. You will simply select the appropriate sensor from the MAP tab of your preferred tuning software and your all set. Select your application carefully as there a 3 different style sensors currently available.

Scalar 838

Offset 31

List Price: $79.99
Our Price: $79.99
Sale Price: $59.99
You save $20.00!
Private Label MFG Power Driven Diesel EGR  Delete Kit 08-10 Ford Powerstroke 6.4L Private Label MFG Power Driven Diesel EGR Delete Kit 08-10 Ford Powerstroke 6.4L

PLM EGR Delete Kit for Ford Super Duty and Excursion (08 - 10) 6.4L

PLM EGR Delete Kit is from PLM. This competition-tested Delete Kit is a great replacement for your entire stock Powerstroke EGR system. This kit gives your Ford Powerstroke engine quicker turbo spool, increased throttle response, lower EGTs, and lower coolant temperatures at the same time increase MPG.


List Price: $125.00
Our Price: $60.00
Sale Price: $60.00
You save $65.00!
Private Label MFG Power Driven B-series Throttle Bodies Private Label MFG Power Driven B-series Throttle Bodies

Private Label MFgís Throttle Bodies are designed to be used with factory intake manifolds as well as aftermarket Intake Manifolds for bolt-on horsepower and torque gains by optimizing engine airflow, all at a competitive price. The B-Series 70mm Throttle bodies are 10mm larger in diameter than the OEM 60mm Throttle body. The Throttle Bodies are precision die-cast from high-quality materials with an idle adjustment screws for fine tuning. Each Throttle Body features an oversized bore, which results in significant horsepower gains throughout the powerband on naturally aspirated applications and even more on forced induction ones. This results in a larger opening for incoming air and dyno proven 12-15 WHP gains (modified engine with port matched intake manifold opening).  Some vehicles may require customizing of coolant lines


**We recommend port matching the intake manifold to have the best results

List Price: $120.00
Our Price: $120.00
Sale Price: $100.00
You save $20.00!
Private Label MFG SUBARU WRX / STI 2015 + CHARGE PIPE Private Label MFG SUBARU WRX / STI 2015 + CHARGE PIPE

Private Label MFG SUBARU WRX / STI 2015 + CHARGE PIPE replaces the OEM charge pipe which is restrictive with uneven airflow. Designed with smooth bends with a smooth interior finish while offering a larger diameter charge pipe creates better intercooler efficiency. Increase throttle response and decreases turbo lag. Available in powdercoated RED. Includes all necessary connectors to install onto the original stock system for easier installs and compatibility.

List Price: $299.00
Our Price: $299.00
Sale Price: $175.00
You save $124.00!
Private Label MFG Power Driven BMW 07-13 135i / 335i N54 / N55 Aluminum Chargepipe UPGRADE KIT Private Label MFG Power Driven BMW 07-13 135i / 335i N54 / N55 Aluminum Chargepipe UPGRADE KIT

Increase throttle response and decreases turbo lag.
Available in Powdercoated Black
Includes DUAL 1/8" NPT nozzle for Meth Injection.
Throttle body matched 3" piping.
Billet CNC OEM TB Flange available for a leak free connection.
Includes everything necessary to upgrade from factory chargepipe.

CHOICE OF OEM REPLACEMENT OPTION OR TIAL(50mm) BOV OPTION

List Price: $250.00
Our Price: $250.00
Sale Price: $195.00
You save $55.00!
Private Label MFG Power Driven Polaris Slingshot Cold Air Intake w/ Heat Shield Private Label MFG Power Driven Polaris Slingshot Cold Air Intake w/ Heat Shield

Private Label MFG Power Driven Polaris Slingshot Cold Air Intake is designed to have the diverted cold air drawn from the front of the vehicle, while having a powder coated heatshield be a barrier from being heat soaked.
This is ideal for all forms of competition; autocross. drag racing and road racing.

List Price: $295.00
Our Price: $295.00
Sale Price: $200.00
You save $95.00!
MERCEDES BENZ 3.2L AMG HEAT EXCHANGER MERCEDES BENZ 3.2L AMG HEAT EXCHANGER

Mercedes Benz C32 AMG Power Driven Heat Exchanger

List Price: $599.00
Our Price: $599.00
Sale Price: $325.00
You save $274.00!
heat exchanger MERCEDES BENZ 5.5L AMG HEAT EXCHANGER

Mercedes Benz E55 AMG Power Driven Heat Exchanger

Supercharged Mercedes AMG's tend to overheat under hot weather or extreme driving conditions. If you increase boost or horsepower, expect your intake charge temp to rise even further.

The solution is to add the PLM upgraded heat exchanger. This heat exchanger will significantly reduce intake charge temps allowing you to keep the power.

PLM Power Driven Heat Exchangers mount in stock position. Installation requires basic hand tools and is the ONLY heat exchanger on the market that does not require any cutting or modifications to vehicle to install and that's affordable.

Get Yours Today and lower IAT (Intake Air Temp.) !!

List Price: $699.00
Our Price: $699.00
Sale Price: $345.00
You save $354.00!
heat exchanger PLM Power Driven AUDI Reservoir Kit (A4 / S4) (B8 +B8.5)

Private Label MFG Reservoir Kit Mounts behind the stock bumper. Supercharged Audiís tend to overheat under hot weather or extreme driving conditions. If you increase boost or horsepower, expect your intake charge temp to rise even further. The solution is to add the upgraded Private Label MFG Power Driven Reservoir Kit. This Reservoir Kit will significantly reduce intake charge temps allowing you to keep power when needed. The Private Label MFG Power Driven Reservoir Kit Is full aluminum and increases your fluid capacity to 4 additional liters. With the 4 additional liters you the vehicle will have more fluids to cool down the system compared to the OEM piece. Installation requires basic hand tools and is the ONLY heat exchanger on the market that's affordable & does not require any cutting or modifications to vehicle to install. Get Yours Today and lower IAT (Intake Air Temp.) !!


Link to the Install document.


https://www.dropbox.com/s/nh3h9t93nz2ggji/PLM%20Heat%20exchanger%20install%20instructions.pdf?dl=0

List Price: $495.00
Our Price: $495.00
Sale Price: $395.00
You save $100.00!
heat exchanger MERCEDES BENZ 5.5L AMG HEAT EXCHANGER XL 25% BIGGER

MERCEDES BENZ 5.5L AMG HEAT EXCHANGER XL (25% BIGGER) mount in stock position. Supercharged Mercedes AMG's tend to overheat under hot weather or extreme driving conditions. If you increase boost or horsepower, expect your intake charge temp to rise even further. The solution is to add the upgraded Private Label MFG Power Driven heat exchanger. This heat exchanger will significantly reduce intake charge temps allowing you to keep power when needed. The Private Label MFG Power Driven heat exchangers use non epoxied furnace brazed cores resulting in better heat dissipation and are welded with CNC precision machined billet aluminum necks. It has a 2.25 liter fluid capacity and 4000 square inches of fin area to help battle heat soak issues! Installation requires basic hand tools and is the ONLY heat exchanger on the market that's affordable & does not require any cutting or modifications to vehicle to install. Get Yours Today and lower IAT (Intake Air Temp.) !!





*25% BIGGER
Johnson pump & Water wetter offered for an addtional cost

List Price: $699.00
Our Price: $699.00
Sale Price: $395.00
You save $304.00!
Private Label MFG S2000 INTERCOOLER KIT  ( AP1/AP2) Private Label MFG S2000 INTERCOOLER KIT ( AP1/AP2)

Private Label S2000 INTERCOOLER KIT FOR COMPTECH & VORTECH SUPERCHARGERS:

INTERCOOLER DIMENSIONS  - 22x9x3 5/8 inches    30 inches with end tanks

List Price: $750.00
Our Price: $750.00
Sale Price: $425.00
You save $325.00!
MERCEDES BENZ 3.2L AMG HEAT EXCHANGER COMBO MERCEDES BENZ 3.2L AMG HEAT EXCHANGER COMBO

Mercedes Benz C32 AMG Power Driven Heat Exchanger

List Price: $699.00
Our Price: $699.00
Sale Price: $425.00
You save $274.00!
Private Label MFG H2B Swap Kit Private Label MFG H2B Swap Kit

The Private Label MFG H2B Swap Kit is perfect for drag racing and is designed specifically for converting your H or F series Honda block to run a B-series transmission. The B-series 5spd transmission gives you more flexibility since it comes in many different gearing options as opposed to just being standard on the H/F series models.

This H2B kit allows you the enthusiast to mount any B series manual transmission to any H or F series motor in a 92-95 Honda Civic (EG chassis), 96-2000 Civic (Ek/EM chassis), or 94-01 Acura Integra (DC chassis)


*WILL NOT WORK WITH H22 MOTORS FROM THE PRELUDE SH WITHOUT MAJOR MODIFICATIONS AND WELDING

List Price: $699.00
Our Price: $699.00
Sale Price: $435.00
You save $264.00!
heat exchanger MERCEDES BENZ 5.5L AMG HEAT EXCHANGER COMBO

Mercedes Benz E55 AMG Power Driven Heat Exchanger

Supercharged Mercedes AMG's tend to overheat under hot weather or extreme driving conditions. If you increase boost or horsepower, expect your intake charge temp to rise even further.

The solution is to add the PLM upgraded heat exchanger. This heat exchanger will significantly reduce intake charge temps allowing you to keep the power.

PLM Power Driven Heat Exchangers mount in stock position. Installation requires basic hand tools and is the ONLY heat exchanger on the market that does not require any cutting or modifications to vehicle to install and that's affordable.

Get Yours Today and lower IAT (Intake Air Temp.) !!

List Price: $799.00
Our Price: $799.00
Sale Price: $445.00
You save $354.00!
heat exchanger MERCEDES BENZ 5.5L AMG HEAT EXCHANGER XL COMBO 25% BIGGER

MERCEDES BENZ 5.5L AMG HEAT EXCHANGER XL (25% BIGGER) mount in stock position. Supercharged Mercedes AMG's tend to overheat under hot weather or extreme driving conditions. If you increase boost or horsepower, expect your intake charge temp to rise even further. The solution is to add the upgraded Private Label MFG Power Driven heat exchanger. This heat exchanger will significantly reduce intake charge temps allowing you to keep power when needed. The Private Label MFG Power Driven heat exchangers use non epoxied furnace brazed cores resulting in better heat dissipation and are welded with CNC precision machined billet aluminum necks. It has a 2.25 liter fluid capacity and 4000 square inches of fin area to help battle heat soak issues! Installation requires basic hand tools and is the ONLY heat exchanger on the market that's affordable & does not require any cutting or modifications to vehicle to install. Get Yours Today and lower IAT (Intake Air Temp.) !!





*25% BIGGER
Johnson pump & Water wetter offered for an addtional cost

List Price: $799.00
Our Price: $799.00
Sale Price: $495.00
You save $304.00!
heat exchanger Private Label MFG Power Driven 4.5 HEAT EXCHANGER CLA45, A45, GLA45

Private Label MFG Power Driven's 45 AMG HEAT EXCHANGER CLA45, A45, GLA45 mounts in stock position. Turbocharged Mercedes AMG's tend to overheat under hot weather or extreme driving conditions. If you increase boost or horsepower, expect your intake charge temp to rise even further. The solution is to add the upgraded Private Label MFG Power Driven heat exchanger. This heat exchanger will significantly reduce intake charge temps allowing you to keep power when needed. The Private Label MFG Power Driven heat exchangers use non epoxied furnace brazed cores resulting in better heat dissipation and are welded with CNC-ed precision machined billet aluminum necks & end tanks. Installation requires basic hand tools and is the ONLY heat exchanger on the market that's affordable & does not require any cutting or modifications to vehicle to install. Get Yours Today and lower IAT (Intake Air Temp.) !!



APPLICATIONS:
Mercedes A45 AMG
Mercedes CLA45 AMG
Mercedes GLA45 AMG (bumper fitment may be different)



Johnson pump & Water wetter offered for an additional cost

List Price: $799.00
Our Price: $799.00
Sale Price: $495.00
You save $304.00!
Private Label MFG  BMW 135I/335I INTERCOOLER UNIT (N54/N55) E82/E90/E92 Private Label MFG BMW 135I/335I INTERCOOLER UNIT (N54/N55) E82/E90/E92

The Private Label MFG  5" FMIC was designed to be one of the best performing stock replacement intercoolers available on the market. Our criteria was to achieve maximum efficiency while retaining a simple fitment We use a custom bar & plate intercooler core and a custom fin pack design. Our intercoolers drastically drop the intake air temps without adding any additional turbo lag over your stock intercooler.  Lower intake temperatures result in greater power delivery.

INTERCOOLER CORE DIMENSIONS ARE 20x5x5.5 INCHES

List Price: $795.99
Our Price: $795.99
Sale Price: $500.00
You save $295.99!
heat exchanger Private Label MFG Power Driven AUDI HEAT EXCHANGER (A4 / S4) (B8 +B8.5)

Private Label MFG AUDI HEAT EXCHANGER exchanger mounts in stock location. Supercharged Audiís tend to overheat under hot weather or extreme driving conditions. If you increase boost or horsepower, expect your intake charge temp to rise even further. The solution is to add the upgraded Private Label MFG Power Driven heat exchanger. This heat exchanger will significantly reduce intake charge temps allowing you to keep power when needed. The Private Label MFG Power Driven heat exchangers use non epoxied furnace brazed cores resulting in better heat dissipation and are welded with CNC precision machined billet aluminum necks. The frontal surface is increased by 135 percent compared to stock OEM unit. It has 417 square inches of fin area to help battle heat soak issues! Installation requires basic hand tools and is the ONLY heat exchanger on the market that's affordable & does not require any cutting or modifications to vehicle to install. Get Yours Today and lower IAT (Intake Air Temp.) !!



Link to the Install document.

https://www.dropbox.com/s/nh3h9t93nz2ggji/PLM%20Heat%20exchanger%20install%20instructions.pdf?dl=0

List Price: $999.00
Our Price: $999.00
Sale Price: $895.00
You save $104.00!
997 911 twin turbo intercooler Private Label MFG Porsche 997 (GT2) TWIN INTERCOOLER

Private Label MFG Porsche 997 (GT2) TWIN INTERCOOLER was designed to be one of the best performing stock replacement intercoolers available on the market. Our criteria was to achieve maximum efficiency while retaining a simple fitment We use a custom bar & plate intercooler core and a custom fin pack design. Our intercoolers drastically drop the intake air temps without adding any additional turbo lag over your stock intercooler.  Lower intake temperatures result in greater power delivery.



FITS: 2007 2008 2009  Porsche 997 Turbo & GT2 (911/997)

INTERCOOLER SPEC:


max horsepower capacity: up to 950HP
core length: 14 "
core height: 9"
core thickness: 3.5"
inlet / outlet size: 2.75"  / direct fit on porsche oem piece
end to end length: 21"
each side good for : 620 cfm

note : modification (minor trimming) to the factory plastic housing is required to fit these intercoolers.  these intercoolers are 100% bolt-on, no need for aftermarket silicone hoses.

List Price: $1,200.00
Our Price: $1,200.00
Sale Price: $980.00
You save $220.00!
heat exchanger Private Label Mfg Power Driven AUDI HE & RESERVOIR COMBO (A4 / S4) (B8 +B8.5)

Private Label MFG AUDI HEAT EXCHANGER exchanger mounts in stock location. Supercharged Audiís tend to overheat under hot weather or extreme driving conditions. If you increase boost or horsepower, expect your intake charge temp to rise even further. The solution is to add the upgraded Private Label MFG Power Driven heat exchanger. This heat exchanger will significantly reduce intake charge temps allowing you to keep power when needed. The Private Label MFG Power Driven heat exchangers use non epoxied furnace brazed cores resulting in better heat dissipation and are welded with CNC precision machined billet aluminum necks. The frontal surface is increased by 135 percent compared to stock OEM unit. It has 417 square inches of fin area to help battle heat soak issues! aThis is for the combination of PLM AUDI HEAT EXCHANGER AND RESERVOIR TANK UPGRADE Private Label MFG AUDI HEAT EXCHANGER exchanger mounts in stock location. Supercharged Audiís tend to overheat under hot weather or extreme driving conditions. If you increase boost or horsepower, expect your intake charge temp to rise even further. The solution is to add the upgraded Private Label MFG Power Driven heat exchanger. This heat exchanger will significantly reduce intake charge temps allowing you to keep power when needed. The Private Label MFG Power Driven heat exchangers use non epoxied furnace brazed cores resulting in better heat dissipation and are welded with CNC precision machined billet aluminum necks. The frontal surface is increased by 135 percent compared to stock OEM unit. It has 417 square inches of fin area to help battle heat soak issues! Installation requires basic hand tools and is the ONLY heat exchanger on the market that's affordable & does not require any cutting or modifications to vehicle to install. Get Yours Today and lower IAT (Intake Air Temp.) !! Private Label MFG Reservoir Kit Mounts behind the stock bumper. Supercharged Audiís tend to overheat under hot weather or extreme driving conditions. If you increase boost or horsepower, expect your intake charge temp to rise even further. The solution is to add the upgraded Private Label MFG Power Driven Reservoir Kit. This Reservoir Kit will significantly reduce intake charge temps allowing you to keep power when needed. The Private Label MFG Power Driven Reservoir Kit Is full aluminum and increases your fluid capacity to 4 additional liters. With the 4 additional liters you the vehicle will have more fluids to cool down the system compared to the OEM piece. Installation requires basic hand tools and is the ONLY heat exchanger on the market that's affordable & does not require any cutting or modifications to vehicle to install. Get Yours Today and lower IAT (Intake Air Temp.) !! Installation requires basic hand tools and is the ONLY heat exchanger on the market that's affordable & does not require any cutting or modifications to vehicle to install. Get Yours Today and lower IAT (Intake Air Temp.) !!




INSTALL PDF :

https://www.dropbox.com/s/nh3h9t93nz2ggji/PLM%20Heat%20exchanger%20install%20instructions.pdf?dl=0

List Price: $1,195.00
Our Price: $1,195.00
Sale Price: $1,100.00
You save $95.00!